◉Swiveling designed injection unit helps change screw and barrel to be much easier.
◉Two layers linear guide rails helps shorten the length of injection unit support device, less deformation of the support device, which helps to improve the injection precision.
◉One piece type injection unit support device, helps injection movement to be more precise.
◉Dual carriage cylinder with diagonal layout helps to get more operation space, and get more precise injection movement.
◉Wider range space between tie-bars, more molds size available and able to meet the needs for automatic mold installation system;
◉Long and wider designed movable platen moving feet ensure stable mold open and close movement;
◉Graphite cooper bushes, bigger diameter tie-bars, high quality material for tie-bars and toggle pins ensure longer life-span;
◉T-slot with screw hole platen, mold installation faster and more flexible;
◉Ejector with adjustable stroke, meets more special ejector movements;
|AY110-S :||420 x 370 mm||AY280-S :||630 x 580 mm|
|AY150-S :||470 x 420 mm||AY330-S :||730 x 680 mm|
|AY180-S :||520 x 470 mm||AY450-S :||780 x 730 mm|
|AY230-S :||580 x 530 mm||AY550-S :||875 x 845 mm|
Mechanical unit strength affects the machine life-span, because of the long delivery time and different design from each manufacturer, which is the most difficult service unit for worldwide, the high strength mechanical unit design is one of the most important factor to choose a good IMM.
Ferrimino’s ultra strong mechanical unit helps you no worry on a quality IMM.
Super strong movable platen and the toggle system design helps less platen deformation under high clamping force mold close, molds will be under a perfect balance closing force, especially extend molds life-span.
Excellent Back Platen Design
|The whole clamping unit strength ensure a precise molding, and affects molds life-span, on Ferrimino, the back platen design is extremely strong, ensure the enough clamping force, and clamping unit less deformation under high clamping force movement.|
Strengthen Ribs on Back Platen
|The super strong strengthen ribs guarantee few deformation under high clamping force.|
Back Platen Anti-jumping Device
|Our back platen protected by the anti-jumping device, which is helpful to prevent the back platen move up and down, ensure clamping unit moving in one-line, ensure the high strength clamping unit and precise molding needs, and extend mold life-time.|
- The strong 3pcs designed structure cross platen and the strong moving device, ensure the cross plate a powerful and good balance opening force.
- The strong moving device equipped with graphite copper bushes, mold open and close will be more smooth, and lifetime will be longer
- Tie-bar and cross plate holding bars nearly on a same surface, mold open and close will be much easier and less tie-bar and platen deformation, extremely improved the mold open and close precision, tie-bar, toggle and toggle pins lifetime.
Amazing robust tie-bars made by high quality material with double load groove design, and the strictest QC process ensure the long lifetime.
|Strength of Extension:||300MPa|
|Advantages:|| ① Hardness after heat treatment: 270~300HB BH (Brinell Hardness)|
② Surface hardness after electroplate: 850~900HV (Vickers Hardness)
③ Electroplate thickness: ≥0.04mm.
With high precise laser processing, ensure high rigidity and high precise
A precise clamping unit is not enough, machine frame also important for the precise injection molding, Ferrimino IMM frame processed by high precise laser machine, which can complement each other with the clamping unit to ensure the best mechanical unit precise, and makes injection unit moving on a good balance to get the high repeatability.
Higher precise and faster mold open and close control
To get a more precise and faster mold open and close movement, clamping unit LM now is able for optional, which also highly improved the machine cleanliness, less oil and grease required for production.
On Ferrimino, three different types of nozzle forward control ways are available:
✔ Limited switch nozzle forward stroke control: standard
✔ Transducer nozzle forward stroke control: Optional
✔ Pressure sensor with nozzle touch pressure indicate control: Optional
On Ferrimino, integrated hot runner is available for option, and operate it on the controller panel, save the molds production setting data, you can load your prior mold setting date to production easily, easy to manage your production, and factory layout will be much cleaner.
◉ Linear guide rails makes lubrication to be less, ensure the clean production;
◉ Graphite copper bushes makes clamping unit lubrication no need so often;
◉ High quality seamless pipes reduced leaking risk;
◉ G thread designed valve block will be helpful to avoid oil leaking.
✔ World famous ALFAGIMMA hydraulic hose with safety chain, ensure less leaking risk, safe and clean.